Elettronica Veneta
MCE-520/EV
Piece Thickness Measurement Module

Piece Thickness Measurement Module allows to sort pieces according to their thickness.

The piece is carried upwards and pressed against the sensor in such a way as to determine its thickness according to the output voltage.

When the piece fits the pre-set parameters it is released in the first slide, otherwise it is discarded in the second slide.

The module is assembled on a sectioned aluminium base, and it can be easily moved around the laboratory.

Categories: ,
Contact Sales Spec Sheet

Description

Piece Thickness Measurement Module

MCE-520/EV allows to sort pieces according to their thickness. The measurement is carried out by a sensor whose output voltage is an analog signal between 0-10 V.

The piece is carried upwards and pressed against the sensor in such a way as to determine its thickness according to the output voltage. When the piece fits the pre-set parameters it is released in the first slide, otherwise it is discarded in the second slide.

MCE-520/EV can be fully controlled using a PLC module or an Arduino microprocessor. Thanks to the PLC or Arduino programming software, a wide range of exercises regarding the automation of the module in a working cycle or in stand-alone mode can be developed.

Training Program

  • Fundamentals of Electro-pneumatics
  • Piece selection methods
  • Operating an electrovalve
  • Operating a set of automated sensors
  • Operating a microcylinder
  • Operating a rodless cylinder
  • PLC control
  • Microprocessor control