Contact Sales 
Spec Sheet Description
WGA-101A, Instrumentation Amplifier
The WGA-101A is an Instrumentation Amplifier which is suitable to connect a strain-gage transducer to measure loads, pressure, torques or displacements.
It is compact, lightweight and moderate price.
Monitor terminals on front panel enables easily check data.
Types
Power Supply:
- WGA-101A-00 10 to 30 VDC, 3.5 W or less
- WGA-101A-01 100 VAC, 5 VA or less
- WGA-101A-02 200 VAC, 8 VA or less
- WGA-101A-10 10 to 30 VDC, 3.5 W or less
- WGA-101A-11 100 VAC, 5 VA or less
- WGA-101A-12 200 VAC, 8 VA or less
Balance Adjustment:
- WGA-101A-00 Manual
- WGA-101A-01 Manual
- WGA-101A-02 Manual
- WGA-101A-10 Automatic (Also possible with external contact)
- WGA-101A-11 Automatic (Also possible with external contact)
- WGA-101A-12 Automatic (Also possible with external contact)
Specifications
Channels: 1
Applicable Transducers: Strain-gage transducers
Applicable Bridge Resistance: 87.5 Ω to 1000 Ω (Bridge excitation is limited to 5 or 2 V for transducers with bridge resistance 175 Ω or less)
Bridge Excitation: 10, 5 or 2 VDC (Switchable by changing internal jumper connection)
Rated Output:
- Dual output
- Voltage: ±10 V (Load resistance 2 kΩ or more)
- Current: 4 to 20 mA (Load resistance 500 Ω or less)
- (Corresponding to voltage output of 0 to 10 V)
Zero Adjustment Range: ±1.5 mV/V, by trimmer or auto balance
Sensitivity Adjustment Range:
- x1000 or x4000 (Switchable by changing internal jumper connection)
- Adjustable between x1/1 and x1/4 by the trimmer
Calibration: 0.25, 0.5 or 1.0 mV/V (Switchable by changing internal jumper connection)
Frequency Response:
- 10, 30, 100 or 500 Hz (Switchable by changing internal jumper connection)
- Attenuation: -12 dB/oct.
Nonlinearity: Within ±0.02% FS
Stability:
- Zero point: Within ±0.5 μV RTI /ºC
- Sensitivity: Within ±0.01%/ºC